Facture toughness of Si3N4 fibers: a combined methodology based on single-edge notch tension and micropillar splitting


Transparent Polyelectrolyte Complex Thin Films with Ultralow Oxygen Transmission Rate


Microstructure and properties of Nb-doped diamond-like carbon films deposited by high power impulse magnetron sputtering


Constructing WS2/MoS2 nano-scale multilayer film and understanding its positive response to space environment


Evolution of Microstructure and Hardness of High Carbon Steel under Different Compressive Strain Rates


Experimental investigation and analysis of the influence of tool edge geometry and work piece hardness on surface residual stresses, surface roughness and work …


Covalent Functionalization of Flexible Polyvinyl Chloride Tubing


Resistance Analysis of Spherical Metal Thin Films Combining Van Der Pauw and Electromechanical Nanoindentation Methods






Mechanical Characterization of Cellulose Nanofibril Materials Made by Additive Manufacturing


Surface conversion reaction and high efficient grinding of CVD diamond films by chemically mechanical polishing


Nanoindentation and nanoscratch studies of submicron nanostructured Ti/TiCrN bilayer films deposited by RF-DC co-sputtering method


Structure and properties of duodenary (TiVCrZrNbMoHfTaWAlSi) N coatings by reactive magnetron sputtering


Two and three-body abrasion resistance of rubbers at elevated temperatures


Hot corrosion behavior of plasma sprayed 8YSZ-Alumina-CNT composite coating in Na2SO4–60% V2O5 molten salt environment


Differences in surface failure modes of soda lime silica glass under normal indentation versus tangential shear: A comparative study on Na+/K+‐ion exchange effects


Multidimension, multiscale surface characterization


Influence of Microstructure on Nanomechanical Properties of Polymorphic Phases of Poly (vinylidene Fluoride)


Interdependencies between graphitization of carbon nanotubes and strengthening mechanisms in titanium matrix composites


Journal of the Mechanical Behavior of Biomedical Materials


Corrosion-and Wear-Resistant Pulse Reverse Current (PRC)-Based Electrodeposited Ni-W Coating


Irradiation effects in high entropy alloys and 316H stainless steels at 300° C


Microstructural Characterization of Ti-6Al-4V using Acoustic Emission Signals During Nanoscratch Test


Effect of Sintering Temperature and Heating Rate on Crystallite Size, Densification Behaviour and Mechanical Properties of Al-MWCNT Nanocomposite Consolidated …


Morphological and Tribological Properties of PMMA/Halloysite Nanocomposites


Cooperative deformation behavior between the shear band and boundary sliding of an Al-based nanostructure-dendrite composite


Inorganic Salt Transition States: A Stable and Highly Stretchable Elastomer Like Phase (ELP) of Phosphate Salts at the Air-Solid Interface


Mechanical Properties of Nanocrystalline and Amorphous Gallium Oxide Thin Films


Effect of target composition on the microstructural, mechanical, and corrosion properties of TiAlN thin films deposited by high-power impulse magnetron sputtering


Sintering and Nanoindentation of Ti2SnC (M 2 AX) Ceramics–Attractive Materials in the Topic of Nuclear Engineering


TEM Observation of Deformation under Nanoindentation in Single Crystal Ni-based Superalloys


Investigation of microstructure and fracture toughness of Fe-Zr welded joints


Tribological Behavior of Binary BC Films Deposited by Sputtering-PBII Hybrid System


Enhancement of Mechanical Integrity of Advanced Composites using PMAA-Electropolymerised CF Fabrics


Size Effects and Charting the Physical and Mechanical Properties of Individual Phases and Interphases in Polycrystalline Materials


Characteristics of surface layers on Ti6Al4V alloy borided with CeO2 near the transition temperature


Dissolution and evolution of interfacial oxides improving the mechanical properties of solid state bonding joints


Evolution of Microstructure and Hardness of High Carbon Steel under Different Compressive Strain Rates


Investigation of Microstructure and Mechanical Properties of Fe-V Dissimilar Welds


Assessment of Elastic-plastic and Electrical Properties of Printed Silver-based Interconnects for Flexible Electronics


Effect of solid carburization on the surface microsturcture and mechanical properties of the equiatomic CoCrFeNi high-entropy alloy


Conformal Coating of Metallic Shells on Carbon Nanotube Turfs


Nanoindentation analysis of oriented polypropylene: Influence of elastic properties in tension and compression


Can we use nanoindentation to derive the Poroelastic Parameters of Microporous Rocks?-Experimental Evidence


Cell-layer dependent adhesion differences in wood bonds


Enhancement of the Mechanical Properties of Hydroxyapatite/Sulphonated Poly Ether Ether Ketone Treated Layer for Orthopaedic and Dental Implant Application


Finished plasma strengthening and restoration of fuel equipment details


Additive Manufactured Biodegradable Poly (glycerol sebacate methacrylate) Nerve Guidance Conduits


Chemical and mechanical stability of air annealed cathodic arc evaporated CrAlON coatings


Evaluation of Aging Induced Microstructural Evolution in Lead Free Solders Using Scanning Probe Microscopy


Effects of Mechanical Cycling on the Microstructure of SAC305 Lead Free Solder


Chemical Modification of High Performance Metal-based Nanocomposite Thermal Interface Materials Toward Efficient Cooling in Electronic Systems

Mechanical Characterization of Intermetallic Compounds in SAC Solder Joints at Elevated Temperatures

Form and Functional Repair of Long Bone Using 3D Printed Bioactive Scaffolds


Fabrication of Cu-graphite metal matrix composites by ball milling and spark plasma sintering

Investigation of Microstructural Evolution in SAC Solders Exposed to Short-Term and Long-Term Aging

A characterization of petrified and mummified wood from an Eocene deposit in Mississippi


Size effect and strain induced double twin by nanoindentation in DSS weld metal of vibration-assisted GTAW


Deformation, Wear and Microstructural Evolution of Nano-structured Pearlite Under Repeated Contact Sliding

Anomalous Behavior During Nano‐Compression Superelastic Tests on Cu‐Al‐Ni Shape Memory Alloy Micro Pillars


Effects of Cr and Mo additions on formation and mechanical properties of Arc-sprayed FeBSiNb-based glassy coatings


Noncontact stress measurement from bare UHPC surface using R aman piezospectroscopy


Protective trivalent Cr-based electrochemical coatings for gun barrels


Selective laser melted titanium alloys for hip implant applications: surface modification with new method of polymer grafting


Traceable Nanomechanical Metrology of GaN Micropillar Array


Metal-coated hybrid meso-lattice composites and their mechanical characterizations


Microstructure and mechanical properties of a multilayered CoCrNi/Ti coating with varying crystal structure


Tribo-Corrosion and Corrosion Behaviour of Titanium Alloys with and Without DLC Films Immersed in Synthetic Urine


Microstructure and enhanced mechanical behavior of the Al7Co24Cr21Fe24Ni24 high-entropy alloy system by tuning the Cr content


Characterization of chemically treated Ti-Zr system alloys for dental implant application


Effect of He-irradiation fluence on the size-dependent hardening and deformation of nanostructured Mo/Zr multilayers


Investigation of Fe3Al-based PVD/HVOF duplex coatings to protect stainless steel from sliding wear against alumina


Bias effects on wear and corrosion behavior of amorphous hydrogenated carbon films with zirconia interlayer


Effect of technological parameters on densification of reaction bonded Si/SiC ceramics


Micromechanics of fully lamellar TiAl alloys: effect of lamellar orientation and width


Strong Graphene 3D Assemblies with High Elastic Recovery and Hardness


Indentation strain rate sensitivity of ball-milled spark-plasma sintered Cu-C metal matrix composite


Fabrication of polyamide 6 nanocomposite with improved thermal conductivity and mechanical properties by incorporating low content of graphene



Influence of carbon content on the microstructure, mechanical and tribological properties of CrAlCN coatings deposited by DC unbalanced magnetron sputtering


Template-assisted fabrication of tunable aspect ratio, biocompatible iron oxide pillar arrays


Surface and Interface Designs for Friction Control


Experimental and numerical investigations on microstructures and mechanical properties of hybrid fiber reinforced thermoplastic polymer


HITEMAL-an outer sheath material for MgB2 superconductor wires: The effect of annealing at 595–655° C on the microstructure and properties


Nacre‐Inspired Graphene/Metal Hybrid by In Situ Cementation Reaction and Joule Heating


Functional tissue-engineered microtissue derived from cartilage extracellular matrix for articular cartilage regeneration


The Effect of Solid Solute and Precipitate Phase on Young’s Modulus of Binary Mg–RE Alloys



Effects of Sample and Indenter Configurations of Nanoindentation Experiment on the Mechanical Behavior and Properties of Ductile Materials.


Structural and mechanical characterization of (TiZrNbHfTa) N/WN multilayered nitride coatings


Microstructure, phase composition and mechanical properties of novel nanocomposite (TiAlSiY) N and nano-scale (TiAlSiY) N/MoN multifunctional heterostructures


Tuning hydroxyl groups for quality carbon fiber of lignin


Development of SU-8 Hollow Microneedles on Silicon Substrate with Microfluidic Interconnects for Transdermal Drug Delivery


Surface Property Induced Morphological Alterations of Human Erythrocyte


Carbonation activated binders from pure calcium silicates: Reaction kinetics and performance controlling factors


Microstructure and mechanical properties of Mg97Zn1Y2 alloy reinforced with LPSO structure produced by semisolid squeeze casting


Novel ALD Chemistry Enabled Low-Temperature Synthesis of Lithium Fluoride Coatings for Durable Lithium Anodes


ZnS coating for enhanced environmental stability and improved properties of ZnO thin films


Nano-multilayered coatings of (TiAlSiY) N/MeN (Me= Mo, Cr and Zr): Influence of composition of the alternating layer on their structural and mechanical properties








Synergistic effect of graphene and carbon nanotubes on mechanical and thermal performance of polystyrene


A review on micro-and nanoscratching/tribology at high temperatures: instrumentation and experimentation


Zn-containing polymer nanogels promote cervical dentin remineralization


Hydrogen-free fluorinated DLC films with high hardness prepared by using T-shape filtered arc deposition system


Unraveling the discrepancies in size-dependence of hardness and thermal stability in crystalline/amorphous nanostructured multilayers: Cu/Cu-Ti vs Cu/HfO2


Characterization of Mechanical Properties and Creep Behavior of Woven Glass/Epoxy Substrates by Nanoindentation


A New Insight on the Role of 1-D and 2-D Reinforcements in TiC during High Temperature Plastic Deformation




Hybrid electrospun fibers based on TPU-PDMS and spherical nanohydroxyapatite for bone tissue engineering


The fabrication of SiBCN ceramic components from preceramic polymers by digital light processing (DLP) 3D printing technology


Local microstructure inhomogeneity and gas temperature effect in in-situ shot-peening assisted cold-sprayed Ti-6Al-4V coating


Layered, composite, and doped thermal barrier coatings exposed to sand laden flows within a gas turbine engine: Microstructural evolution, mechanical properties …


Mechanical property evaluation of ZrSiN films deposited by a hybrid superimposed high power impulse-medium frequency sputtering and RF sputtering system


Bioinspired photocatalytic shark skin surfaces with antibacterial and antifouling activity via nanoimprint lithography. ACS Appl. Mater


Post-CMOS Fabrication Technology Enabling Simultaneous Fabrication of 3-D Solenoidal Micro-Inductors and Flexible I/Os


The peregrine falcon’s rapid dive: on the adaptedness of the arm skeleton and shoulder girdle


Structural, mechanical, thermal and optical properties of Yb, Pr-doped Y 4 Zr 3 O 12 ceramics


Influence of structure evolution on tribological properties of fluorine-containing diamond-like carbon films: from fullerene-like to amorphous structures


Effect of thermal annealing on stress relaxation and crystallisation of ion beam sputtered amorphous Si 1-x Ge x thin films


Molecularly grafted, structurally integrated multifunctional polymer thin films with improved adhesion


Simultaneously Enhancing the Thermal Stability, Mechanical Modulus, and Electrochemical Performance of Solid Polymer Electrolytes by Incorporating 2D Sheets


Tungsten Doping Induced Superior Mechanical Properties of Hafnium Oxide for Energy Applications


An investigation of the distribution and location of mast cells affected by the stiffness of substrates as a mechanical niche


Chitosan-hydroxyapatite nanocomposites: effect of interfacial layer on mechanical and dielectric properties


Light enhanced direct Cu bonding for advanced electronic assembly


Ultrahigh Carbon Nanotube Volume Fraction Effects on Micromechanical Quasi-Static & Dynamic Properties of Poly (Urethane-Urea) Filled Nanocomposites


Microstructural and Mechanical Properties of Nanostructured Tungsten Nitride Thin Films Prepared by RF Reactive Magnetron Sputtering


Microstructural and Nanomechanical Properties of Aluminium Nitride (AlN) Thin Films Deposited by RF Magnetron Sputtering


Ultrastrong Al0. 1CoCrFeNi High-Entropy Alloys at Small Scales: Effects of Stacking Faults vs Nanotwins


Enhancing the adhesion of diamond-like carbon films to steel substrates using silicon-containing interlayers


On the Effect of Q&P Processing on the Stretch-flange-formability of 0.2 C Ultra-high Strength Steel Sheets


Chemical depth profile of layered a-CSiO: H nanocomposites


Microscale mechanical properties of ultra-high-strength polysynthetic TiAl-Ti 3 Al single crystals


Mechanical Properties of Ti-alloy joint with Ti20Zr20Cu60-xNix (x= 10, 20, 30, 40 and 50) filler metal


Vanishing of room-temperature slip avalanches in a face-centered-cubic high-entropy alloy by ultrafine grain formation


High Performance Low Dielectric Constant Polymer with Good Film‐Forming Ability Developed from Renewable Plant Oil (Anethole)


Effect of nitrogen flow ratio on microstructure, mechanical and tribological properties of TiWSiN x thin film deposited by magnetron co-sputtering


Nanohardness measurements of heavy ion irradiated coarse-and nanocrystalline-grained tungsten at room and high temperature


Tribocorrosion behavior of TiO 2/Al 2 O 3 nanolaminate, Al 2 O 3, and TiO 2 thin films produced by atomic layer deposition


Microstructure and mechanical properties investigations of copper-steel composite fabricated by explosive welding


Microstructural evolution and its effect on the mechanical behavior of Ti-5Al-5Mo-5V-3Cr alloy during aging


Effect of surface treatment on the mechanical properties and microstructures of Al-Fe single-lap joint by magnetic pulse welding


Xueliang Yan1| Loic Constantin2, 3| Yongfeng Lu2| Jean-Francßois Silvain3|


Moisture related elastic and viscoelastic behaviour of wood adhesives by means of in-situ nanoindentation


Aluminum foam sandwich with density-graded open-cell core: compressive and flexural response


Improved wear resistance of WS 2 film by LT-deposited Ti interlayer with ω phase structure


Optimizing fatigue performance of nacre-mimetic PE/TiO 2 nanolayered composites by tailoring thickness ratio


Tribological response and microstructural evolution of nanostructured bainitic steel under repeated frictional sliding


Improvement in the mechanical properties of eutectic Sn58Bi alloy by 0.5 and 1 wt.% Zn addition before and after thermal aging


Utilization of high entropy alloy characteristics in Er-Gd-Y-Al-Co high entropy bulk metallic glass


Balancing Sodium Impurities in Alumina for Improved Properties


Influence of Powder Morphology and Microstructure on the Cold Spray and Mechanical Properties of Ti6Al4V Coatings


Transient Liquid Phase Bonding of AlN to AlSiC for Durable Power Electronic Packages


Creep mechanism in characteristic orientation of Sn and Sn-1.8 Ag by nanoindentation

Journal of the Mechanical Behavior of Biomedical Materials


Direct metallic bonding assisted by electromagnetic irradiations


Damage Precursor Indicator for Aluminum 7075-T6 Based on Nonlinear Dynamics


Microstructure and mechanical behaviors of CoFeNiMnTi x Al 1-x high entropy alloys



Evaluation of mechanical properties of newer nanoposterior restorative resin composites: An In vitro study


Onion-like carbon films endow macro-scale superlubricity


Micromechanical characterization and modeling of cement pastes containing waste marble powder

Micro-mechanical properties and multi-scaled pore structure of graphene oxide cement paste: Synergistic application of nanoindentation, X-ray computed tomography …


Twin induced fracture toughness in SiC W/SiC composites processed by spark plasma sintering


Nanomechanical characterization of porous materials by atomic force microscopy


Factors determining room temperature mechanical properties of bimodal microstructures in Ti-6Al-4V alloy


Residual stress and microstructure effects on mechanical, tribological and electrical properties of TiN coatings on 304 stainless steel


Design and Scalable Fabrication of Hollow SU-8 Microneedles for Transdermal Drug Delivery


The evolution of hardness in Cu-W alloy thin films



Bridging the Gap: Optimized Fabrication of Robust Titania Nanostructures on Complex Implant Geometries towards Clinical Translation


Multimode ultrasound viscoelastography for three-dimensional interrogation of microscale mechanical properties in heterogeneous biomaterials


Grain refinement and amorphization in nanocrystalline NiTi micropillars under uniaxial compression


A translation of the structure of mussel byssus threads into synthetic materials by the utilization of histidine-rich block copolymers


Rationalizing Distinct Mechanical Properties of Three Polymorphs of a Drug Adduct by Nanoindentation and Energy Frameworks Analysis: Role of Slip Layer …


In situ small-scale hydrogen embrittlement testing made easy: An electrolyte for preserving surface integrity at nano-scale during hydrogen charging


Unique mechanical properties of Cu/(NbMoTaW) nanolaminates



Alloying and strain hardening effects in abrasive contacts on iron based alloys


Magnetron-sputtered Ti x N y thin films applied on titanium-based alloys for biomedical applications: Composition-microstructure-property relationships


Compartir noticia